RFID is a frequency-operated technology. Not all RFID cards have the same frequencies. But instead, they differ from use to use. Therefore, knowing what kinds of RFID cards you can integrate with an RFID card dispenser is essential.

As you are aware, card dispensers use ISO standard protocols to print RFID tags. Hence, basic knowledge about the available and legal standards is essential, whether operating a parking lot card dispenser or a typical one for checking tickets. Knowing the common terminologies is a must.

Kinds of RFID Cards Based On Frequencies for Card Dispenser

There are three common types of RFID cards you can create using an RFID dispenser. Although these are not the only ones available for most applications, you will find them at play.


Low-frequency cards are standard for making employee passes. They have a frequency range of 125 kHz and work best for closer proximities. You can set your RFID dispenser to imprint tags within this frequency, and only a compatible RFID reader will read the information stored in it.


Next comes the high-frequency RFID cards. Similar to low-frequency tags, some RFID dispensers also imprint higher frequency tags. The typical frequency range for these kinds of RFID tags is 13.56 MHz. RFID tags with this frequency range are mainly fit for physical access.

Ultra-High Frequency

The last kind is the most powerful, with a frequency range of 860-960 MHz; these tags store transaction information. Moreover, they allow easier tagging as they have an extended operating distance.

Knowing the frequencies available for RFID tags is one thing, but how would one know which card to buy? The following section solves that issue.

How to Pick a Suitable Card for Your RFID card Dispenser?

Once you know which frequency will fit your use, the next thing to consider is the compatible material for your RFID dispenser. Since cards vary in shapes and thicknesses, it is vital to take some time to decide on the correct dimensions.

  • The first thing to consider is your machine’s compatibility. Sift around in its instruction manual to know which materials are workable, like plastic cards or polymers. Since there is no shortage of card materials in the market, you’ll easily find your material.
  • Next, you need to check which cards the machine can dispense. Because dual functioning units are also available, they print contact and contactless cards. Hence, ensure your machine prints the needed cards.
  • Lastly, you must check the dispenser works on the legal ISO protocols. Otherwise, the RFID tag will store the information inaccurately. Although every machine has its configurations, you can look for models which support common card standards like S50, NTAG203, 210, 212, 213, and S70, etc.

But suppose you are looking for a reliable and versatile working unit. In that case, you can look for additional like an IC card reading and writing module, interference resistance capability, and an easy installing machine. You can find such perfection in the motorized F3 dispenser available at Lintechtt.

The Bottom Line

RFID card dispensers are a rising trend as more and more businesses move to automate their information tracking system. Resultantly, various frequency ranges and tags appear to help store specific information.

An RFID dispenser is not a hassle if you know what you want. However, it is essential to note that you input only the compatible material cards in the unit to keep it functioning correctly. An incompatible card material or placement can damage the unit before you take out your first pass.


Please enter your comment!
Please enter your name here